JVC KA-MR100G 사용자 설명서

For presetting the time code generator of the memory recorder.

(00:00:00:00) 

_ 23:59:59:29

or
(00:00:00:00) 

_ 23:59:59:24

The number of frames that can be specified are as shown below, depending on 
the setting of the frame rate. (e.g., when the frame rate is 60, you can specify the 
number of frames up to a value of 58.)

(00:00:00:00) 

_ FF FF FF FF

For presetting the user bit. (8 digits)

For specifying the first four characters of the clip name before recording, or 
resetting the clip number.

● An eight-digit clip name is automatically configured.

● Serial numbers are automatically appended as the last four digits whenever a 

clip is created. Serial numbers are automatically appended even when SxS 
memory card is replaced or after changing the first four characters of the clip 
name at 

APREFIXB.

(Last three digit of the serial 
number + K)

For specifying the first four characters of the clip name.
(Usable characters: A to Z, a to z, 0 to 9, -, _)
The default clip name is set as the “last three digits of the serial number + K”.
Example: If the serial number is 00001234, then the default clip name is 234K.

YES
NO

You can reset the clip number (0001) after changing the clip name at 

APREFIXB.

If clips already exist on the SxS memory card, the smallest available number will 
be used.
Example: If 0001 exists on the SxS memory card, then 0002 will be used.
YES : Reset clip number. (Press the [INFO/CLR] button.)
NO

: Do not reset clip number. (Press the [STOP] button.)

For configuring settings related to the clock of the memory recorder.

UTC-12:00 

_ 

(UTC-05:00) 

_ UTC+14:00

For setting the time difference with the UTC (Universal Time Coordinate).
AUTC Time Difference Chart by RegionB (A Page 17)
When the setting of this item is altered, the [DATE]/[TIME] values below will be 
automatically adjusted.

(--/--/--)

For setting the date (month/day/year). The last two digits of the western calendar 
is used.
Press the [INFO/CLR] button to display the default setting.

(--:--:--)

For setting the time (hour:minute:second).
Press the [INFO/CLR] button to display the default setting.

For setting the date or time display mode.

YY/MM/DD
(MM/DD/YY)
DD/MM/YY

For specifying the display style of the date.

● Altering the setting of this item also changes the [DATE] display mode on the 

[CLOCK1] setting screen.

YY/MM/DD : Year/Month/Day
MM/DD/YY : Month/Day/Year
DD/MM/YY : Day/Month/Year

For specifying the display style of the time.

● Altering the setting of this item also changes the [TIME] display mode on the 

[CLOCK1] setting screen.

12

: 12-hour display (AM/PM display)

24

: 24-hour display

For setting processes related to the SxS memory card.

Starts the formatting (initialization) of the SxS memory card.

● When formatting is performed, all clips stored inside the SxS memory card will 

be cleared.

YES : Format. (Press the [INFO/CLR] button.)
NO

: Do not format. (Press the [STOP] button.)

Scans the SxS memory card and makes attempts to restore damaged clips.

● However, success of the restore process is not guaranteed.
YES : Execute. (Press the [INFO/CLR] button.)
NO

: Do not execute. (Press the [STOP] button.)

For configuring settings related to the control buttons and menus of the memory 
recorder.

You can disable the button control of the memory recorder to avoid misoperations 
during shooting.
UNLOCK: Enables all buttons.
LOCK

: Button control is disabled, with the exception of the following.

● Record/Standby (REC trigger button of the camcorder)

● Menu screen display ([MENU] button)

● Power On ([POWER] button)

For resetting the menu settings of the memory recorder to the default values.
YES : Restore default settings. (Press the [INFO/CLR] button.)
NO

: Do not restore default settings. (Press the [STOP] button.)

Frame rate

60

50

30

25

24

Number of frames

58

48

29

24

23

KA-MR100G_EN.book  Page 13  Thursday, February 5, 2009  5:28 PM