JR Direct The Ultimate Radio Control System XP8103 사용자 설명서

Model Select (System Set-Up Mode)

The XP8103 transmitter employs a memory function which mem-
orizes data for up to 10 individual aircraft. All settings along
with type selection, function, and different aircraft are used by
one transmitter. For example, Model 1 is airplane and Model 2
is helicopter. To avoid confusing models, inputting model names

for each aircraft is recommended (see page 29). Press the UP
and DN keys simultaneously and turn the power switch ON to
access the System Set-Up Mode.

The display below shows the model selection function.

model name
(if dot is shown, model
name is blank)

modulation

type

model number (1-10)

SELECT

CLEAR

Press UP and DN keys
simultaneously to exit the
System Set-Up Mode

To Model Name function

To Info Display function

Function select

(select model/copy)

Model selection

(1-10)

Press UP and Select keys
simultaneously to access the
System Mode info display

XP8103 Manual Addendum

Please refer to the info below for clarification before using these functions.

This information is applicable in all model types (Airplane, Helicopter, Glider).

Airplane 28

Helicopter 66

Glider 106

Manual Page

It is necessary to press the clear key once after the system
has been returned to the normal display to also transfer the
timer data. If the clear key is not pressed after the model
select function, the time setting from the current model will
be changed to the time setting of the

previous model.

Timer Data Transfer: