John Deere STARFIRE RTK OMPFP11348 사용자 설명서
900 MHz RTK—GS2 Display
DK01672,00001BE -19-11NOV11-2/2
Base Station Data (Information)
Operator can view the following:
Base Station Data in information that will be displayed
when in Quick survey Base or Absolute Base Mode.
•
Status
- OK—Base Station is transmitting correction.
- No Stored Base—24 hour self survey is required for
- OK—Base Station is transmitting correction.
- No Stored Base—24 hour self survey is required for
current location.
- Initializing—Receiver is initializing radio, acquiring
GPS signal.
- Self Survey—24 hour self survey in progress.
•
Sat. Corrections – Indicates number of GPS satellites
for which base station is transmitting correction.
for which base station is transmitting correction.
•
Distance – Difference between base station location
(known position) and location indicated by uncorrected
GPS. Displayed in miles (kilometers).
(known position) and location indicated by uncorrected
GPS. Displayed in miles (kilometers).
•
Direction – Direction from base station location (known
position) to location indicated by uncorrected GPS.
Displayed in degrees with true North as 0 degrees.
position) to location indicated by uncorrected GPS.
Displayed in degrees with true North as 0 degrees.
•
Base Battery – Base Station voltage. Displayed in volts.
Radio Data and Connection
Signal Level – Level of signal which is detected at radio.
Select Refresh button to refresh signal level.
Select Refresh button to refresh signal level.
Vehicle Mode – Base Station Data
NOTE: Information that will be displayed when
in Vehicle Mode.
•
Status
- OK – Base Station is transmitting correction.
- No Stored Base – 24 hour self survey is required for
- OK – Base Station is transmitting correction.
- No Stored Base – 24 hour self survey is required for
current location.
- Initializing – Receiver is initializing radio, acquiring
GPS signal.
- Self Survey – 24 hour self survey in progress.
- No Signal – Vehicle RTK radio is not receiving signal
- No Signal – Vehicle RTK radio is not receiving signal
from base station.
•
Sat. Corrections – Indicates number of GPS satellites
for which base station is transmitting correction.
for which base station is transmitting correction.
•
Distance – Difference from base station to vehicle
receiver. Displayed in miles (kilometers).
receiver. Displayed in miles (kilometers).
•
Direction – Direction in degrees to base station.
Displayed in degrees with true North as 0 degrees.
Displayed in degrees with true North as 0 degrees.
•
Base Battery – Base Station voltage. Displayed in volts.
Radio Data and Connection
•
Signal Level – Level of signal which is detected at radio.
Press Refresh button to refresh signal level.
Press Refresh button to refresh signal level.
•
Data Received (%) – Percent of received correction to
vehicle from base station.
vehicle from base station.
Indicates source of correction. If there is no correction,
this will toggle between base and repeater. There is also a
TOGGLE button for manual toggle between two sources.
this will toggle between base and repeater. There is also a
TOGGLE button for manual toggle between two sources.
25-4
121511
PN=29