John Deere STARFIRE RTK OMPFP11348 사용자 설명서

900 MHz RTK—Original GreenStar Display

JS56696,00007F6 -19-15APR10-1/1

Continued on next page

JS56696,00007F7 -19-15APR10-1/3

Quick Survey Mode

NOTE: Display is not required after base station

receiver has been configured to operate in Quick
Survey Base Mode and RTK Frequency, Radio
Channel/Network ID have been set.

Connect display to base station..

Screen: SETUP - RTK

Press: SETUP >> StarFire 3000 >> DIFF CORRECTION
SETUP >> RTK SETUP

NOTE: Quick Survey Base Mode allows base

station to broadcast corrections after receiver
calculates GPS position.

If power is removed from base station (but not
moved) power can be restored and same base
station position will be used for corrections. If
previously used Track 0 is recalled in Parallel
Tracking/Auto Trac no Shift Track will be needed.

If power is removed and base station is moved, a new
position will be calculated when power is restored.
If previously used Track 0 is recalled in Parallel
Tracking/Auto Trac, use Shift Track. (See AutoTrac
Operator's Manual for Shift Track procedures.)

Press letter button next to RTK OPERATING MODE and
toggle to QUICK SURVEY BASE MODE.

PC12081

—UN—13MA

Y09

SETUP - RTK

A—RTK Operating Mode
B—RTK Radio Channel
C—RTK Network ID
D——

E—Submit
F— —
G—Ruturn to RTK setup

Absolute Mode

IMPORTANT: Absolute Base Mode requires base

receiver to be mounted in a rigid position.
Tripod is not recommended.

NOTE: Display is not required after base station

receiver has been configured to operate in
Absolute Survey Base Mode and RTK Radio
Channel/Network ID have been set.

Connect display to base station.

Screen: SETUP - RTK

Press: SETUP >> StarFire 3000 >> DIFF CORRECTION
SETUP >> RTK SETUP

Press letter button next to RTK OPERATING MODE and
toggle to ABSOLUTE SURVEY BASE MODE.

A—RTK Operating Mode
B—RTK Radio Channel
C—RTK Network ID
D——

E—Submit
F— —
G—Return to RTK Setup

PC12082

—UN—13MA

Y09

SETUP - RTK

30-3

121511

PN=42