Jack Lalanne's Power Juicer Power Juicer Elite 작동 가이드
Assembly/Main Unit
7
STEP
2
:
Place receptacle on the base, with
juicer spout facing the same direction
as locking bar. Settle receptacle
into alignment.
juicer spout facing the same direction
as locking bar. Settle receptacle
into alignment.
STEP
1
:
WARNING:
Never plug the
power cord into an electrical outlet
before unit is fully assembled
before unit is fully assembled
.
Place base on a dry flat surface with
locking bar in down position on
the spout side in front of the
machine (as shown).
locking bar in down position on
the spout side in front of the
machine (as shown).
STEP
3
:
Place filter inside receptacle,
matching the opening on its
bottom to the screw peg
connected to the base.
matching the opening on its
bottom to the screw peg
connected to the base.
Note: Refer to page
6 for all part names.
6 for all part names.
POWER JUICER ELITE
POWER JUICER ELITE
6
Parts/Main Unit
Lip
Chute
Screw Peg
Micro
Safetyswitch
MAIN UNIT
(Fully Assembled)
Receptacle
Removable
Non-Drip
Spout
Pegs
(Pegs fit into blade.)
Filter
Blade
E-Z Loader Attachment
with E-Z Plug
Lid with Pulp Guard
Pulp
Collector
Pusher
Crescent Tool
(for tightening and removing blade)
Base
Locking Bar
Assembly
Main Unit
Parts
Main Unit
Micro Reset Switch
WARNING: DO NOT OVER TIGHTEN)