Motorola GT10 사용자 설명서
GT10/GT30
5.2
Entering Configuration Settings with GTWIN
83
that shown below, where the type of initial device, the address, and the number of words
can be specified.
can be specified.
Device Setting dialog box
Click on the button to display the pull–down
menu, and select the device from that menu.
Enter the address using the ten–keys.
menu, and select the device from that menu.
Enter the address using the ten–keys.
The button functions as a backspace
key when entering addresses.
key when entering addresses.
The button acts as a Clear key.
CAUTION
Data for PLC devices held in the GT10 will be written to the internal
PLC device the next time that the power supply is turned on.
PLC device the next time that the power supply is turned on.
If the power supply on the GT10 side is not turned on, the data can
be held for the period of time that the backup with the internal
secondary battery is effective. For information on the internal
secondary battery specifications, see “What the Internal Secondary
Battery Does” on page 128.
be held for the period of time that the backup with the internal
secondary battery is effective. For information on the internal
secondary battery specifications, see “What the Internal Secondary
Battery Does” on page 128.
5.2.8
GT Configuration Settings: “GT Internal Device Hold”
Clicking on the “GT Internal Device Hold” tab in the “GT Configuration Settings” dialog
box displays the screen shown below. “GT Internal Device Hold” is a function that holds
the values for an internal device (GDT or GWR) in the GT main unit.
box displays the screen shown below. “GT Internal Device Hold” is a function that holds
the values for an internal device (GDT or GWR) in the GT main unit.
“GT internal device hold” screen