Motorola GT10 사용자 설명서
GT10/GT30
6.2
Entering Configuration Settings with GTWIN
97
Device settings dialog box
Clicking on the button displays a pull–down
menu. Select the device for which settings are
to be entered, and use the ten–keys to enter
addresses.
menu. Select the device for which settings are
to be entered, and use the ten–keys to enter
addresses.
The button functions as a backspace
key when entering addresses.
key when entering addresses.
The button acts as a Clear key.
REFERENCE
For detailed information on the basic communication area map, see
“GT30 Basic Communication Area Map” on page 38.
“GT30 Basic Communication Area Map” on page 38.
EXPLANATION
Standard settings
Clicking on the
button in the “GT Configuration” dialog box
displays the following message. Clicking on [OK] sets the default values (the
configuration settings entered when the unit is shipped) for all of the settings.
configuration settings entered when the unit is shipped) for all of the settings.
For information on the contents of configuration settings entered when the unit is
shipped, see “Contents of configuration settings for GT30 when shipped from the
factory” on page LEERER MERKER.
factory” on page LEERER MERKER.
6.2.3
GT Configuration Settings: “Communication Parameters”
Clicking on the “Communication Parameters” tab in the “GT Configuration” dialog box
displays the following screen.
displays the following screen.
This is where communication parameters for the PLC and personal computer (GTWIN)
connected to the GT30 are set.
connected to the GT30 are set.