Motorola MICOM-2ES/2RS/2TS ALE 사용자 설명서
Warnings, Cautions and Notes
Warnings, Cautions and Notes
The following notations are used to place special emphasis on procedures, or to call
attention to precautionary measures.
attention to precautionary measures.
Warning
An operating procedure, practice and so forth, which if not
followed correctly, could result in personal injury, or loss of life.
followed correctly, could result in personal injury, or loss of life.
Important
An operating procedure, practice and so forth, which if not followed
correctly, could result in damage to, or destruction of equipment.
correctly, could result in damage to, or destruction of equipment.
Note
An operating procedure, condition and so forth, to which special
attention should be paid.
attention should be paid.
General Safety Precautions
The following are general safety precautions that are not related to any specific
procedures and therefore do not appear elsewhere in this publication. These are
recommended precautions that personnel must understand and apply, in addition to
the precautions listed in the Information for Safe, Efficient Operation section.
procedures and therefore do not appear elsewhere in this publication. These are
recommended precautions that personnel must understand and apply, in addition to
the precautions listed in the Information for Safe, Efficient Operation section.
Warning
High
Voltage
Do not touch the antenna and the RF connectors when the
transceiver operates.
During transmission, high RF voltages appear at the RF
connectors, the antenna cables, and on the antenna itself. These
voltages may cause severe injury or even death on contact.
Operating and maintenance personnel must be familiar with the
applicable safety requirements before attempting to install or
operate the transceiver. Severe injury or death could result from
failure to comply with the safety practices.
transceiver operates.
During transmission, high RF voltages appear at the RF
connectors, the antenna cables, and on the antenna itself. These
voltages may cause severe injury or even death on contact.
Operating and maintenance personnel must be familiar with the
applicable safety requirements before attempting to install or
operate the transceiver. Severe injury or death could result from
failure to comply with the safety practices.
_________________________________________________________________________________________________
i