Mitel GPS Orion-S/-HD Receiver 사용자 설명서

다운로드
페이지 54
Document Title: 
 
28 
User’s  Manual for the GPS Orion-S/-HD Receiver 
Document No. 
 
Issue 1.0 
GTN-MAN-0110 
 
June 22, 2003 
 DLR/GSOCNo part of this document shall be reproduced in any form or disclosed to third parties without prior authorization. 
4.3.3.2 
DW – Doppler Window 
If code lock for an allocated GPS satellite is not acquired within a given time, the search is 
extended in neighbouring frequency bins at steps of ±500 Hz. The maximum Doppler offset 
considered in this search can be specified by the DW command. Its value should account for 
the expected reference frequency error (±1575 Hz at 1 ppm) and the uncertainty of the pre-
dicted Doppler shift. A peak line-of sight velocity of about 1000 m/s is encountered in terres-
trial applications, thus requiring an additional ±5 kHz window in cold start tracking mode. For 
LEO satellites, a window of up to ±40 kHz may be required. 
Execution of the command is acknowledged by an F98 command reply of the form  
I-DW-Changed Doppler window to 11500Hz
 
Negative input values are ignored and an error message  
E-DW-Ignored (invalid argument)
 
is issued. 
 
CmdID  Chars.  Format 
Description 
DW 
72  
Set Doppler window 
 
1 x 
<STX> 
 
2 xx 
Command Id (=DW) 
 
5 xxxxx 
Doppler search interval [Hz] (
±value)
 
 
2 xx 
Checksum  
 
1 x 
<ETX> 
 
Notes: 
• 
The specified search window is applied in cold start tracking mode or whenever a 
navigation fix has not been achieved within the past two minutes. Otherwise a one-
bin search in the nominal Doppler window is carried out based on the available posi-
tion/velocity information and oscillator offset. 
 
 
Example: 
 
<STX>DW150000E<ETX>
 
Extend frequency search to ±15 kHz 
<STX>DW00E<ETX>
 
Enforce one-bin Doppler window (requires accurate a priori 
navigation information and oscillator error knowledge)