MINOLTA DI3010 관리 매뉴얼
3
3.1 Names of Control Panel Parts and Their Functions
3-2
Di2010/Di2510/Di3010/Di3510
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
3.1
Names of Control Panel Parts and Their Functions
1
2
3
4
5
6
7
8
9
10
11
12
17
16
15
14
13
No.
Part Name
Function
1
Touch panel
Displays various screens and messages.
Touch items in the touch panel to select screens and specify
settings.
Touch items in the touch panel to select screens and specify
settings.
2
[Extra Scan] key
Press to use the IP Scanner functions.
(Internet Fax & Network Scan Kit and Network Interface Card
must be installed.)
(Internet Fax & Network Scan Kit and Network Interface Card
must be installed.)
3
[Scan] key
Press to enter Scan mode.
(Network Interface Card, and either Network Scan Kit or
Internet Fax & Network Scan Kit must be installed.)
(Network Interface Card, and either Network Scan Kit or
Internet Fax & Network Scan Kit must be installed.)
4
[Copy] key
Press to enter Copy mode.
5
Sub power switch
Use to turn the copier on and off.
6
[Access] key
Press when an access code must be entered.
• If the “Copy Track Mode” parameter is set to “OFF”, nothing
• If the “Copy Track Mode” parameter is set to “OFF”, nothing
happens when this key is pressed.
7
[Interrupt] key
• Press to enter Interrupt mode.
• To cancel Interrupt mode, press the [Interrupt] key again.
• To cancel Interrupt mode, press the [Interrupt] key again.
8
[Panel Reset] key
Press to reset all modes and functions to their default settings.
9
[C] (clear) key
• Press to reset the number of copies to “1”.
• Press to erase a setting (such as the zoom ratio or size)
• Press to erase a setting (such as the zoom ratio or size)
selected using the 10-Key Pad.
10
[Stop] key
• Press to stop a copy operation.
• Press to stop the scanning of a document.
• Press to stop the scanning of a document.
11
[Start] key
Press to start a scanning or copy operation.
12
10-Key Pad
Use to enter a number, such as the number of copies.
13
[Utility] key
Used to display the Utility screen.
For more details, refer to “Utility Mode Operations” in the
Advanced Operations volume of the User Manual.
For more details, refer to “Utility Mode Operations” in the
Advanced Operations volume of the User Manual.