Microsoft ES4612 사용자 설명서

Configuring the Switch

3-80

3

• Flow control – Shows if flow control is enabled or disabled.
• LACP – Shows if LACP is enabled or disabled.
• Port Security – Shows if port security is enabled or disabled.
• Max MAC count – Shows the maximum number of MAC address that can be 

learned by a port. (0 - 1024 addresses)

• Port security action – Shows the response to take when a security violation is 

detected. (shutdown, trap, trap-and-shutdown)

• Combo forced mode – Shows the forced/preferred port type to use for 

combination ports 9-12. (copper forced, copper preferred auto, SFP forced, SFP 
preferred auto)

Current status:
• Link Status – Indicates if the link is up or down.
• Operation speed-duplex – Shows the current speed and duplex mode.
• Flow control type – Indicates the type of flow control currently in use.

(IEEE 802.3x, Back-Pressure or none)

CLI – This example shows the connection status for Port 5.

Console#show interfaces status ethernet 1/5

Information of Eth 1/13
 Basic information:
  Port type: 1000T
  Mac address: 00-30-f1-47-58-46
 Configuration:
  Name:
  Port admin: Up
  Speed-duplex: Auto
  Capabilities: 10half, 10full, 100half, 100full, 1000full,
  Broadcast storm: Enabled
  Broadcast storm limit: 500 packets/second
  Flow control: Disabled
  Lacp: Disabled
  Port security: Disabled
  Max MAC count: 0
  Port security action: None
  Combo forced mode: None
 Current status:
  Link status: Down
  Operation speed-duplex: 100full
  Flow control type: None
Console#