Microsoft ES4612 사용자 설명서
Command Line Interface
4-310
4
Example
show ip pim neighbor
This command displays information about PIM neighbors.
Syntax
show ip pim neighbor [ip-address]
ip-address - IP address of a PIM neighbor.
Default Setting
Displays information for all known PIM neighbors.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show ip pim interface 1
Vlan 1 is up
PIM is enabled, mode is Dense.
Internet address is 10.1.0.253.
Hello time interval is 30 sec, trigger hello time interval is 5 sec.
Hello holdtime is 105 sec.
Join/Prune holdtime is 210 sec.
Graft retry interval is 3 sec, max graft retries is 2.
DR Internet address is 10.1.0.254, neighbor count is 1.
Vlan 1 is up
PIM is enabled, mode is Dense.
Internet address is 10.1.0.253.
Hello time interval is 30 sec, trigger hello time interval is 5 sec.
Hello holdtime is 105 sec.
Join/Prune holdtime is 210 sec.
Graft retry interval is 3 sec, max graft retries is 2.
DR Internet address is 10.1.0.254, neighbor count is 1.
Console#
Console#show ip pim neighbor
Address VLAN Interface Uptime Expire Mode
--------------- ---------------- -------- -------- -------
10.1.0.254 1 17:38:16 00:01:25 Dense
Address VLAN Interface Uptime Expire Mode
--------------- ---------------- -------- -------- -------
10.1.0.254 1 17:38:16 00:01:25 Dense
Console#
Table 4-106 show ip pim neighbor - display description
Field
Description
Address
IP address of the next-hop router.
VLAN Interface
Interface number that is attached to this neighbor.
Uptime
The duration this entry has been active.
Expire
The time before this entry will be removed.
Mode
PIM mode used on this interface. (Only Dense Mode is supported.)