Midland Radio 77-120ESP 사용자 설명서

다운로드
페이지 13
Owner’s Manual 77-120 ESP 
 www.midlandradio.com 
 
Page 11 of 13 
 
 
 
 
How ESP2™ works to make your CB sound better. 
 
The ESP2™ noise reduction system constantly monitors the signal strength and 
the type of noise present.  When the signal strength is too low for good reception, 
the receiver sound is automatically adjusted to dramatically reduce the noise that 
comes through the speaker.  While the noise is decreased the actual sounds you 
need to hear are increased. 
 
Skip interference can cause whistles and howling sounds.  Electrical interference from power 
lines, ignition systems or other sources can produce low humming and buzzing noise.  These 
high and low sounds are not needed for communications.  ESP2™ can determine the difference 
between undesired noises and sounds you want to hear and filter the noises out.   
 
These results ESP2™ can accomplish without decreasing receiver range (it 
usually increases range).  Most importantly, ESP2™ works by itself and does not 
need to be listening to other ESP2™ equipped CB’s to be 100% effective.  
 
The end result of ESP™ is that you can lower or completely stop using your 
squelch control.  You will hear weak signals that cause other CB’s to hear only 
noise.  With this new patented sound control system you will find yourself using 
your CB more thereby increasing your safety and enjoyment.