MGE UPS Systems 66074 사용자 설명서

Network
Management Cards

User Manual

T H E   U N I N T E R R U P T I B L E   P O W E R   P R O V I D E R

Network Management Card

 – User Manual

34003676EN/GA

Page 

31/69

Click on the “Network” section in the menu.

This menu enables the administrator to configure the network parameters of the card and authorisation of the
remote upgrade of the embedded system.

 

Z 

IP address: The IP address of the card (e.g.: 172.17.23.205).

Z 

Subnet Mask: The mask of the sub-network of your network (e.g.: 255.255.255.0). 

Z 

Gateway Address: Indicate the IP address of the gateway to access the stations located outside the
card’s sub-network (e.g.: 172.17.1.24). 

Z 

Hostname must be suited to the card. This is the first part of the full qualified domain name, used by the

DNS  (name must be compatible with DNS rules)

Z 

Domain name is the domain to which the card belongs. This is the part of the full qualified domain name

that follows the host name and is used by the DNS. The default value of the two parameters comprising the

full qualified domain name: ups.domain.com

Z 

TELNET connection: Authorises (choose enable) remote connection with a terminal to access the

maintenance menu.

See “

“ for more information

Z 

BootP/DHCP: Authorises (choose enable) configuration of network parameters with your BootP/DHCP

server when the card is booted