MGE UPS Systems 66074 사용자 설명서

Network
Management Cards

User Manual

T H E   U N I N T E R R U P T I B L E   P O W E R   P R O V I D E R

Network Management Card

 – User Manual

34003676EN/GA

Page 

6/69

Before installing the MGE Network Solution, the UPS must be set up as indicated in the steps below. 

Z 

Shut down the computers to be protected by the UPS.
Connect the UPS to a wall outlet. (For UPSs above 3kVA, please refer to the UPS installation manual)

Z 

Connect the power cord of each computer to an outlet on the UPS. (For UPSs above 3kVA, please refer to
the UPS installation manual)

Z 

Insert the optional card in the UPS and connect the UPS to the computer network.

Z 

Start the MGE UPS, then the computers.

Z 

Set up the Network Management Card (see user manual).

Z 

Install Network Shutdown Module on all machines that are to be protected by the UPS (supplied with UPS

battery backup power).

The software components for each platform and the user manuals are supplied free-of-charge on the Solution-
Pac 2 CD or are available for download on the 

 Web site, in the “

” section”

MGE provides 2 different form factors for its Network Management Cards :

Z 

NMC Minislot  for UPS systems like the Evolution, EXtreme C, Pulsar EX RT, Pulsar/Comet DX series.

Z 

NMC Transverse for UPS systems like the Galaxy 3000, Galaxy 5000, Galaxy PW, Pulsar and Comet

EXtreme series. Other MGE UPS systems (3-phase Comet, Galaxy, EPS 6000) can be remotely managed

using the Network Management Link

.

The Network Management Cards acquire information on the operation status of the UPS systems and provide
remote control of these systems by means of an ETHERNET network from any SNMP administration station or
Web browser. They also supply alarms to the Network Shutdown Modules to trigger shutdown or other
automatic actions for protected servers.

A simple html browser is used for supervision and configuration.
Network Management Cards are compatible with all MGE UPS SYSTEMS supervision / protection systems:

Z 

Z 

Z 

 solution comprises a box to be connected to the Card Settings port of the

Network Management Cards:

Environment Sensor enables measurement of temperature and humidity around the UPS, consideration of

external alarms via 2 dry contacts and notification of alarms according to pre-programmed thresholds.