MGE UPS Systems 66074 사용자 설명서
www.mgeups.com
Network
Management Cards
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card
– User Manual
34003676EN/GA
Page
60/69
6.2 Configuration via Telnet
You can access the configuration menu (see “
” section) from a station equipped with
the Telnet protocol.
As soon as the card is accessible on the network, enter the command:
As soon as the card is accessible on the network, enter the command:
telnet < card IP address > to access the menu.
The password defined by default is MGEUPS.
The card will disconnect automatically after 3 minutes of inactivity.
The card will disconnect automatically after 3 minutes of inactivity.
6.3 Configuration via SSH
You can access the configuration menu (see “
” section) from a station equipped with
the SSH protocol when https option is selected.
The NMC implements SSH V1 and 3DES encryption cipher only, connection use port 22.
The NMC implements SSH V1 and 3DES encryption cipher only, connection use port 22.
when user connect to NMC by SSH, the screen will hold about 10 seconds for process encryption cipher.
6.3.1 PuTTY SSH Client Program
PuTTY is a free implementation of Telnet and SSH for Win32 and Unix platforms,
along with an xterm terminal emulator. You can get the PuTTY by
along with an xterm terminal emulator. You can get the PuTTY by
Here after, we will show you how to set up PuTTY programme for connecting to NMC
card by SSH V1 protocol.
card by SSH V1 protocol.
Execute PuTTY and select the following options:.