MicroNet Technology SP5530 사용자 설명서

 

- 5 - 

Depending on the data traffic, the Link LED will begin to flash, indicating that the 
camera is receiving/sending data from/to the network. 

The built-in omni-directional microphone allows the camera to receive sound and 
voice. 

 

 

 

 
 
 
 
 

The DC power input connector is located on the camera’s rear panel, and is 
labeled DC5V 2.5A with a single jack socket to supply power to the camera.  
Power will be generated when the power supply is connected to a wall outlet. 

Factory Reset will be initiated when the reset button is pressed continuously for 
three seconds; meanwhile, the Link LED lights up or blinks.  Release the reset 
button and the Link LED will turn off, indicating that the camera has restored 
factory default settings.  When factory reset is completed, the configuration of 
camera will return to the defaults as: 
- IP 

address: 

-  Administrator’s login name: admin 
- Password: 

 

-  Wireless status (for wireless model): disabled 

The camera’s rear panel features an RJ-45 connector for connections to 10Base-
T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be 
Category 5 twisted-pair cable).  The port supports the N-Way protocol and 
“AutoMDIX” function, allowing the camera to automatically detect or negotiate the 
transmission speed of the network. 

 
 
 

.