McIntosh MVP891 사용자 설명서

How to Operate the MVP891

Your McIntosh MVP891 has been configured for de-

fault operating settings that will allow you to immedi-

ately enjoy superb video and high fidelity audio from

a wide variety of discs. If you wish to make changes

to the default settings, a Setup feature is provided to

customize the operating settings using On Screen

Menus (refer to the Setup instructions in this manual

on page 18). Most operations that can be performed

with the Front Panel Push-buttons can also be per-

formed with the Remote Control.

Notes: 1. Some of the MVP891 operating functions such as

Disc Languages, Video Angle or Menu Language

are active only if the function is supported by

data encoded on the disc.

2. Some Blu-ray discs support BD Live downloads,

providing various forms of additional informa-

tion for the disc currently in the player. This

additional information is stored in memory. The

MVP891 has 1GB of internal memory storage,

however the BD Live Information is deleted

when the MVP891 is switched OFF. An external

USB Memory Drive is supplied with the MVP891

and its memory is not deleted when the MVP891

is switched OFF. For additional information

refer to page 6.

3. The USB Memory Drive should only be inserted

or removed from the Front Panel of the MVP891

when the player is in the Standby Mode (OFF).

4. When the MVP891 is On and has been idle for

approximately 5 minutes, the internal circuitry

goes into a hibernation state to conserve energy.

To bring the MVP891 out of hibernation requires

two presses of a function command such as Play,

Open/Close, etc.

Power On

The Red LED above the STANDBY/ON switch lights

to indicate the MVP891 is connected to AC Power.

To Switch ON the MVP891, press the STANDBY/

ON Push-button on the Front Panel or the (Power)

Push-button on the Remote Control. The STANDBY

Red LED will flash during the initialization process.

Refer to figures 30 and 32.

Note: When the MVP891 is switched On, it will take

from 20 to 30 seconds for initialization of the

internal circuitry to take place before the player is

ready to begin operation.

Disc or USB Memory Drive Selection

The MVP891 plays Optical Discs and USB Memory

Drives. One can select between the two sources by

pressing the SOURCE Push-button once. Press the

SOURCE Push-button a second time to return to disc

playback. The chart below illustrates the various Front

Panel Information Display indications:

Playback Media

Display Indication

Blu-ray Disc

BDMV

DVD Disc

Video

DVD-Audio Disc

Audio

SACD Disc

SACD

CD Disc

USB Drive

00001

Note: Depending on how a given disc has been mastered,

the MVP891 Front Panel Display may indicate

something different.

How to Load a BD, DVD, SACD or CD Disc

1. Press the OPEN/CLOSE Push-button. The disc

tray will slide out allowing a disc to be loaded.

Refer to figures 30 and 32.

Note: When the player is in Standby Mode, the

MVP891 Power will automatically Switch-

On when the OPEN/CLOSE Push-button is

pressed.

2. Press the OPEN/CLOSE Push-button and the disc

tray will close. The Front Panel Information Dis-

play will indicate “LOADING”. Refer to figure 31.

If the tray contains

a Blu-ray, DVD

disc or DVD-Au-

dio, it will start to play without pressing the PLAY

Push-button. When the tray contains a SACD or

CD Disc, the Front Panel Information Display will

indicate the disc type. Press the PLAY Push-but-

ton for playback of a SACD or CD disc.

Note: Do to the increase in Video/Audio resolution

of a Blu-ray Disc, it will take slightly longer to

Figure 30

Figure 31