McDATA OPENconnectors Command Line Interace 사용자 설명서
CLI Commands
config
2
2-9
FRQILJSRUWIDQ
6\QWD[
fan portNumber fanOn
3XUSRVH
This command sets the fabric address notification (FAN) state for a
port (Sphereon 4500 only). This configuration can be applied to any
port regardless of its current configuration. The FAN value is applied
at the time the port is configured and operated in a loop.
port (Sphereon 4500 only). This configuration can be applied to any
port regardless of its current configuration. The FAN value is applied
at the time the port is configured and operated in a loop.
3DUDPHWHUV
This command has two required parameters.
&RPPDQG([DPSOH
Root> config port fan 4 1
portNumber
Specifies the port number. Valid values are:
0–23 for the Sphereon 4500
0–23 for the Sphereon 4500
fanOn
Specifies the FAN state for the port. Valid values
are true and false. Boolean 1 and 0 may be
substituted as values.
are true and false. Boolean 1 and 0 may be
substituted as values.