Matrox Electronic Systems ATC RG-200DL 사용자 설명서

This section describes how to install a Matrox interface card in your host computer. If your Matrox 
interface card is already installed in your computer, skip to 

. For 

information specific to your computer, like how to remove its cover, see your system manual.

If a graphics card isn’t already installed in 
your computer, skip to 

Using 

 in the 

Windows

, remove any 

currently installed display drivers. 
Restart your computer for the changes 
to take effect.

After your computer restarts, you’re 
prompted to install drivers for the new 
graphics hardware detected. Click 

.

Turn off your computer and all peripherals such as your monitor or printer.

Open the computer and remove your existing graphics card. (If graphics hardware is 
built into the motherboard of your computer, you may need to disable it manually after 
your Matrox card is installed. For more information, see your system manual.)

 To avoid personal injury and to prevent damage to your computer or Matrox 

hardware, turn off your computer, unplug it, and then wait for it to cool before you install 
your Matrox product and touch any of the internal parts of your computer.

While your computer is turned off but still plugged in, some electrical current is supplied 
to the motherboard. This current may prevent newly installed hardware from working 
properly.

Also, static electricity can severely damage electronic parts. Before touching any electronic 
parts, drain static electricity from your body (for example, by touching the metal frame of 
your computer). When handling a card, carefully hold it by its edges and avoid touching its 
circuitry. 

* With multi-display mode, you may be able to use your existing graphics card. For Windows 2000/XP, see Windows 2000/XP 

online help under “Install additional monitors”.