Mamiya RZ67 PRO II 사용자 설명서

 

RB67 lenses are mounted directly onto the RZ PRO 

II

 ; however, 

the bellows must be extended 7 mm in order to focus the lens at 
infinity. Therefore, even when photographing distant subjects, be 
sure to use the Focusing Screen. 
CAUTION: Because of the differences in flange back between the 
two series of lenses, the Distance Scale of the RZ PRO 

II

 body 

does not apply when using RB67 lenses. 
 

When a RB67 lens is mounted on the RZ PRO 

II

 body, use the 

Shutter Speed Ring of the lens for shutter speed selection. 

Be sure to set to the "RBL" position. Once this done all the other 

speed dial settings are immobilized. 

The shutter is cocked and released in the same manner as RZ 

series lenses. 

When using a Mamiya Sekor C lens for the RB series on the RZ 

PRO 

II

 body, be sure to insert an optional interchange mounting 

ring into the lens rear mount to assure correct coupling with the 
camera body. 
• Older RB Lenses should be checked before use, to determine if 

their shutter torque is compatible with the RZ PRO 

II

. Before try 

ing, please send such lenses to the service department of your 
country's Mamiya distributor. 

When using the RB series PD Prism Finder or PD Magnifying 

Finder be sure the Electrical Contact Cover is in place, for it is used 
to depress the switch at the base of the finder. 
 

The RZ PD Prism Finder will not function on the RZ 

II

. It cannot 

be retrofitted. 

40