Macsense Connectivity AeroPad Mini 사용자 설명서
32
if your wireless router has an IP of "10.0.1.1", and your computer was given an IP
of "10.0.1.101", then setting AeroPad Mini's fixed IP to "10.0.1.50" will make it
accessible while your computer is online. You will just use a web browser and
enter "http://10.0.1.50/" to access AeroPad Mini's web-config pages.
of "10.0.1.101", then setting AeroPad Mini's fixed IP to "10.0.1.50" will make it
accessible while your computer is online. You will just use a web browser and
enter "http://10.0.1.50/" to access AeroPad Mini's web-config pages.
If I have multiple AeroPad Minis in my wireless network, do I need to define
each AeroPad Mini a unique fixed IP?
each AeroPad Mini a unique fixed IP?
No, AeroPad Mini has a default fixed IP of "192.168.1.50". This is the IP by which
you use your browser to access its internal web-config pages. It is OK that each
AeroPad Minis continues to have the same default fixed IP, even though multiple
AeroPad Minis are being used in the same wireless network.
you use your browser to access its internal web-config pages. It is OK that each
AeroPad Minis continues to have the same default fixed IP, even though multiple
AeroPad Minis are being used in the same wireless network.
Why my computer can not connect to the Internet?
Access AeroPad Mini's web-config page and make sure that the correct SSID
has been entered. If WEP is used, make sure the WEP key types (Open/Shared,
64/128-bit, Hex/ASCII, slots) are properly selected and entered. Both the SSID
and WEP values should match the same in the access point of your wireless
network.
has been entered. If WEP is used, make sure the WEP key types (Open/Shared,
64/128-bit, Hex/ASCII, slots) are properly selected and entered. Both the SSID
and WEP values should match the same in the access point of your wireless
network.
Make sure that you have changed your PC's TCP/IP setting back to “Obtain an IP
Address Automatically” after you completed configuration of the AeroPad Mini. If
you are using a Mac, make sure it is set back to “Using DHCP".
Address Automatically” after you completed configuration of the AeroPad Mini. If
you are using a Mac, make sure it is set back to “Using DHCP".