MacroSystem Digital Video HDV-Recorder 사용자 설명서

Once you have stopped playback, the system 
returns to the normal live signal video display 
or a grey screen appears with the text `No HDV 
Signal´.

With the `cut and paste´ function, you can move 
the position of the films in order to rearrange the 
order for the `Play all films´ mode. 
Simply mark the film you wish to move and 
press the F2 key to cut. Now, select an (empty) 
available storage bank and press the F1 key to 
paste the film in that particular bank.

The Delete Menu allows you to delete existing 
videos from the banks. Select the respective 
storage bank and then press the Ok key. 
Additionally, the text `Remove Video?´ must be 
confirmed with `Yes´.

This menu works just like the Playback Menu. 
However, the item `Play all films´ is missing.
Requirement for sending and copying a film is a 
camera with a recording mode or a recorder.

After selecting a film from a bank and having 
started it, the material is sent via Firewire/IEEE 
1394 to the connected camera or recorder. It is 
now possible to record the material to a DV tape 
for example.
Note: Please note that when sending footage to 
a camera, the system plays the material about a 
second earlier and a second longer at the end. 
This is the time required by the camera to record 
the material.

When sending, the video is simultaneously 
displayed on the monitor. This is technically-
dependant delayed (like during a record in the 
Record Menu), so that it is necessary that you 
monitor the camera picture rather than that of 
the recorder. 
Additionally, the video is displayed on the 
monitor without interlacing, irrelevant of what 
you have selected in the menu. As the data 
stream sent to the camera is not changed, the 
monitored picture is displayed in this same 
fashion.

The video does not restart at the end; playback 
is stopped.

In this menu, you can trim the start and end of