LUCE PT-L6510E 사용자 설명서
32
Adjusting the position
1. Obtain MENU window and move highlight
cursor up and down through the menu
with the
or
button.
2. Adjust parameter value for the selected
item with the
or
button. For items
that call for a separate bar graph, first
show the bar graph with the “ENTER” or
/
button, then adjust parameter value
with the
or
button.
• RGB/YP
B
P
R
/DVI signals
• Composite/S-video signal
CLK PHASE
(for RGB signals only)
Adjust clock phase after you are finished with dot
clock adjustment.
Clock phase adjustment allows the user to minimize
visible noise with the
clock adjustment.
Clock phase adjustment allows the user to minimize
visible noise with the
or
button.
HORIZONTAL POSITION (H.POSI)
button: Shifts the picture to the right.
button: Shifts the picture to the left.
button: Shifts the picture to the left.
VERTICAL POSITION (V.POSI)
button: Shifts the picture upward.
button: Shifts the picture downward.
button: Shifts the picture downward.
VIDEO SIZE
(Vaild for composite video/S-video only)
button: Increases picture size.
button: Reduces picture size.
button: Reduces picture size.
DOT CLK
(Vaild for RGB signals only)
Fine, regular patterns on the screen may be disturbed
by fine stripe noise called moire. Dot clock adjustment
allows the user to minimize this moire.
Fine, regular patterns on the screen may be disturbed
by fine stripe noise called moire. Dot clock adjustment
allows the user to minimize this moire.
KEYSTONE
Keystone distortion can be corrected only along either
horizontal bound of the picture:
V. LINEARITY
After you are finished with keystone adjustment,
adjust vertical linearity with the
adjust vertical linearity with the
or
button.
Vertical linearity is not adjustable if no correction was
made to keystone distortion.
made to keystone distortion.
Note
• A noise may not disappear when adjusting the
dot clock or clock phase at UXGA signal mode.
• Clock phase is adjustable for each of R, G,
and B signals. Final parameter values are
saved to memory.
• Clock phase adjustment is not available for
digital RGB signals.
POSITION
H-POSI
V-POSI
V-POSI
128
64
SELECT
ENTER
ESC
DOT CLK
34
CLK PHASE
32
KEYSTONE
1
V-LINEARITY
32
ASPECT
STANDARD
STANDARD
4 : 3
POSITION
H-POSI
V-POSI
V-POSI
32
16
16
SELECT
ENTER
ESC
VIDEO SIZE
32
KEYSTON
1
V-LINEARITY
32
STANDARD
ASPECT
b u t t o n :
b u t t o n :
Note
• Keystone distortion can be corrected to
±
20˚ of
the angle of tilt for the projector. However, the
greater the correction amount,the more the picture
quality will deteriorate, and the harder it will
become to achieve a good level of focus. To obtain
the best picture quality, set up the projector and
screen in such a way that the amount of keystone
correction required is as minimal as possible.
• The picture size will also change when
correction of keystone distortion is carried out.