Lorex L284161 사용자 설명서

Installing the Hard Drive 

The Hard Drive serves the same purpose in a DVR as a video cassette does in a VCR. Please 
follow the steps carefully in order to ensure proper installation.

The compartment located on the front panel of the DVR is the removable Cartridge Casing in 
which you insert the Hard Drive. The various parts of the Cartridge Casing are labeled for your 
reference.

• Lift the Handle and pull towards you. 

The Cartridge Casing will slide out of 
the DVR.

• Un-clip the release latch with the word “OPEN” printed 

beside it by gently pushing on the latch.

• Slide the cover off to where it locks or catches the stopper 

and lift the Cartridge Casing to remove it.

• Take the Hard Disk Drive and Connect the 

two cables from the back of the Cartridge 
Casing to the Hard Drive. 

• The cables should be pushed in firmly, but 

not forcibly.

• The 4 Pin connection is the DC Power cable, 

and the wider cable is the standard Hard 
Drive IDE type connection.

NOTE: 

You may find that the cartridge casing is 
locked. In this case, skip ahead to step 7 
to find instructions on unlocking the cabi-
net, then return to Step 2