Lorex L284161 사용자 설명서

Sensor Set

1. SENSOR RECORD - Sets the Sensor Recording 

to ON/OFF. Navigate to this option using the 
buttons, and press the   button to change the 
option.

2. SENSOR RECORD DURATION - Sets the length 

of time for the recording once a sensor input has 
been detected (i.e. If Motion is detected, the DVR 
will start recording, and will continue recording for 
10 seconds). Navigate to this option using the 
buttons, and press the   button to change the 
option to one of the following settings: OFF / 10 / 
20 / 30 / 40 / 50 and 60 seconds. 

3. SENSOR1 - SENSOR4 - Sets the input type for 

each sensor. Navigate to this option using the 
buttons, and press the   button to change the 
option to one of the following settings: N/OPEN 
(Normally Open) or N/CLOSE (Normally Closed).

This submenu allows you to change the settings for a separate sensor device (such as a 
stand-alone Motion Sensor, or Door/Window Sensor). These sensors are installed on the ALARM 
BLOCK (see page 41 for Alarm Block Configuration).

SENSOR RECORD
SENSOR RECORD DUR.
SENSOR1
SENSOR2
SENSOR3
SENSOR4

[ ON ]
[ 10 SEC]
[ N/OPEN ]
[ N/OPEN ]
[ N/OPEN ]
[ N/OPEN ]

[

]MOVE [ ]SELECT [

ˆ

]EXIT

1. MOTION RECORD - Sets the Motion Recording 

to ON/OFF. Navigate to this option using the 
buttons, and press the   button to change the 
option.

2. MOTION RECORD DURATION - Sets the length 

of time for the recording once motion detection has 
been detected. Navigate to this option using the 

 buttons, and press the   button to change 

the option to one of the following settings: OFF / 
10 / 20 / 30 / 40 / 50 and 60 seconds. 

3. CHANNEL1 - CHANNEL4 - Sets the Channel to 

ON/OFF for recording Motion. Navigate to this 
option using the 

 buttons, and press the 

button to change the option.

4. SENSITIVITY - Sets the sensitivity for Motion 

Detection from 1 (low sensitivity) to 5 (high 
sensitivity). Navigate to this option using the 
buttons, and press the   button to change the 
option.

This submenu allows you to change the settings for cameras with integrated motion sensors.

MOTION RECORD
MOTION RECORD DUR.
CHANNEL1
CHANNEL2
CHANNEL3
CHANNEL4
SENSITIVITY

[ ON ]
[ 10 SEC]
[ N]
[ Y ]
[ N ]
[ N ]
[ 3 ]

[

]MOVE [ ]SELECT [

ˆ

]EXIT