Lowrance electronic LVR-880 EU 사용자 설명서
Lowrance - LVR-880 Operation Instructions
23
3-1-6 Send Waypoint Data to a Chartplotter
You can send waypoint data over NMEA2000 to a compatible chartplotter.
MENU SELECT
WAYPOINT
BACKLIGHT
BUDDY LIST
WAYPOINT
WP LIST
NEAREST WP
TEMP
TEMP2
WPT
DELETE
TX WPT DATA
Select WAYPOINT then WP LIST. Your waypoint list is displayed. Press ENT.
1.
NEW WP starts to flash.
Scroll down to the waypoint whose data you want to send to the chartplotter then
Scroll down to the waypoint whose data you want to send to the chartplotter then
2.
press ENT. In the example scroll to TEMP2 then press ENT.
Scroll down and select TX WPT DATA and press ENT to send the data.
Scroll down and select TX WPT DATA and press ENT to send the data.
3.
3-1-7 Edit or Delete a Temporary Waypoint
MENU SELECT
WAYPOINT
BACKLIGHT
BUDDY LIST
WAYPOINT
WP LIST
NEAREST WP
TEMP
TEMP2
GO
TEMP EDIT
DELETE
TEMP EDIT
TEMP2
18 46.243 N
160 125.341 E
18 46.243 N
160 125.341 E
SAVE
NEW WP1
YES
NO
Select WAYPOINT then TEMP. Your temporary waypoint list is displayed.
1.
Select the temporary waypoint to edit then select TEMP EDIT.
2.
Note: To delete the temporary waypoint, select DELETE then YES. The temporary waypoint is
deleted immediately and the temporary waypoint list is displayed again.
deleted immediately and the temporary waypoint list is displayed again.
The waypoint details are displayed. The cursor is at the first character of the name.
3.
Edit the temporary waypoint name OR to edit only the latitude or longitude, press ENT
4.
repeatedly until the cursor moves to the required line.
When you are finished, press ENT (repeatedly if necessary) until a new LCD appears.
When you are finished, press ENT (repeatedly if necessary) until a new LCD appears.
5.
Press ENT to store the changes. The waypoint list is displayed again. If more changes are
6.
required, repeat steps 2 through 6. Otherwise, press EXIT.
WP LIST
NEW WP TEMP2
MOB
TEMP1
TEMP
TEMP1
TEMP2