Lexicon 570 사용자 설명서
32
Dancer Communications, Inc.
DIP
Help with the DIP command
Type DIP at the command prompt and the Messenger 570 system will return a list of valid alarm commands
and related instructions.
and related instructions.
COMMAND>DIP
DIP SWITCH SETTING
===== =========
DIP R DIP Switch Report
DIP Switch Report
Type DIP R at the command prompt and the Messenger 570 system will generate a report indicating the
required DIP switch settings for the unit’s current input setup. Note: This report does not indicate the
current DIP switch settings. It only reports how the DIP switches should be set.
required DIP switch settings for the unit’s current input setup. Note: This report does not indicate the
current DIP switch settings. It only reports how the DIP switches should be set.
COMMAND>DIP R
TOP DIP SWITCH
=== === ======
0 = OFF
1 = OFF
2 = OFF
3 = OFF
4 = ON
5 = ON
6 = ON
7 = ON
BOTTOM DIP SWITCH
====== === ======
0 = ON
1 = ON
2 = ON
3 = ON
4 = OFF
5 = OFF
6 = OFF
7 = OFF
The example above shows what a report would look like if you had inputs 1-4 defined as 4-20 mA sensor
types and input 5-8 as dry contact sensor types.
types and input 5-8 as dry contact sensor types.
HLP
Help
Type HLP at the command prompt and the Messenger 570 system will return instructions for entering
commands.
commands.