Lanier 2001 사용자 설명서
Dial Registration
Facsimile Programming
4 - 17
Speed Dial Keys
The fax number and other data for a particular destination can be programmed using a 3-
digit Speed Dial Number. This feature allows you to transmit a document to the
particular destination by pressing the Speed Dial Key, entering the 3-digit number and
pressing the START Key. You can program a fax number in any of the 200 Speed Dial
locations, number 001 to 200.
digit Speed Dial Number. This feature allows you to transmit a document to the
particular destination by pressing the Speed Dial Key, entering the 3-digit number and
pressing the START Key. You can program a fax number in any of the 200 Speed Dial
locations, number 001 to 200.
Entering
1
Press the PROGRAM Key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press 2 or scroll down to the Speed Dial menu and
press YES.
press YES.
3
Enter the number of the location you want to
program and press YES.
program and press YES.
4
Enter the Telephone number you wish to transmit
to and press YES after checking to see its OK.
to and press YES after checking to see its OK.
5
Enter the Name you wish associated with this
number and press YES after checking to see it OK.
number and press YES after checking to see it OK.
6
You are given the opportunity to program additional locations. Continue to enter additional
Speed Dial locations or press NO to exit.
Speed Dial locations or press NO to exit.
Edit/Deleting
1
If you wish to change any entry, a screen allows you to accept or change.
2
If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
either EDIT or DELETE and then proceed with the
needed changes.
DIAL REGISTRATION?
YES / or 1-5
2 SPEED DIAL?
OK=YES
SPEED DIAL =_
OK=YES
OK=YES
NAME=_
OK=YES
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH”YES”-