Intermate 100 사용자 설명서
Intermate100 and Intermate101 Print Server Administration Manual
109
[General]: Enable Front Panel Messages (PJL)
14.4.
Enable Front Panel Messages (PJL)
This parameter was introduced in release level 1071.
It enables and disables the PJL commands used for writing
messages in the front panel of the Local Printer.
messages in the front panel of the Local Printer.
The messages in question describe what kind of processing is
going on, for example “IPDS Printing”, “IPP Printing”, and so
on.
going on, for example “IPDS Printing”, “IPP Printing”, and so
on.
Important: In order to use the printer’s PJL capability, you must
in the print server to
“Yes” on the
page.
The printer must be able to understand PJL— but it
need not be able to send PJL messages.
need not be able to send PJL messages.
Tip:
PJL message and commands (especially @PJL) will
probably be written on your print job if you have
enabled Front Panel Messages on a printer that
does not support PJL.
probably be written on your print job if you have
enabled Front Panel Messages on a printer that
does not support PJL.
For further information on messages and status information
about the local printer, see
about the local printer, see
For information on messages and status information about net-
work printers (Network Destinations), see
work printers (Network Destinations), see
in the chapter
Values
Comments
Yes
Enable front panel messages.
No *
Disable front panel messages.