Intermate 100 사용자 설명서

This parameter specifies the destination of the printed output 
to be used in connection with the logical printer you are config-
uring.

If you are not using NDO, the only possibility is to keep the 
default which is Local Printer (0).

If you are using NDO, you can choose among six possibilities 
for a given logical printer:

“Local” is also referred to as the local port and refers to the 
Centronics parallel port on the printer to which the 
Intermate1xx is physically attached.

If you choose a Network Destination which has not been 
defined in 

, and then 

send a job to the logical printer in question, the job will be dis-
carded and an error message will appear in the System Log 
(see 

). The same thing will 

happen if you have defined a Network Destination, but have no 
NDO license key installed (G22-based print servers).

If you choose “pool”, you must also fill in the next field in the 
block defining the logical printer you are configuring.

Older print servers

Newer print servers 

Local(0)

Local Printer (0)

Netw1(1)

Network Destination 1 (1)

Netw2(2)

Network Destination 2 (2)

Netw3(3)

Network Destination 3 (3)

Netw4(4)

Network Destination 4 (4)

Pool

Pool