Intermate 100 사용자 설명서
Intermate100 and Intermate101 Print Server Administration Manual
212
Using the IMCU for Maintenance: Single Print Server
30.2.
Single Print Server
1
Log in to the IMCU server program.
2
Display the “Device list”.
3
Use the “Expand” icon to bring forth a list of
devices discovered on the segment where the
print server you want to update or transfer settings
to is located.
devices discovered on the segment where the
print server you want to update or transfer settings
to is located.
4
Make sure that you have the “Links” column
displayed. If there are many columns displayed,
you may have to scroll to the right to find it. If it’s
not there you need to adjust your column selection.
displayed. If there are many columns displayed,
you may have to scroll to the right to find it. If it’s
not there you need to adjust your column selection.
5
Refresh the information on the segment.
6
Locate the Intermate1xx to be upgraded.
7
Find the “firmware upgrade” icon in the “Links”
column. Clicking on it will bring up a list as shown
below in the next step.
column. Clicking on it will bring up a list as shown
below in the next step.