Intermate 100 사용자 설명서

This section deals with how to set up PSF/2 which makes it 
possible to print IPDS data to a LAN attached printer with an 
installed Intermate100 using TCP/IP.

If you need to know how to connect PSF/2 to an IBM host to 
receive AFP and IPDS data, please refer to your PSF/2 docu-
mentation,

•

OS/2 version 2.11 or newer

•

DB/2 version 1.0 or newer

•

PSF/2 version 1.1 or newer (check with your point of 
purchase for recommended CSD levels or contact 
support)

•

TCP/IP version 2.0 (CSD UN56401) or newer

Start the PSF/2 control panel by selecting PSF/2 Folder > 
PSF/2  - Control Panel icon.

In the Control Panel select Profile > New. The PSF/2 New 
Device dialog box appears.

Enter the "Device Name" and the "Description". Select the 
desired IPDS "Device Resolution" (240 dpi or 300 dpi). 
Do NOT select a resolution which is not supported. Note 
that the default resolution in the Intermate100 is 300 dpi.

Select TCP/IP as "Attachment Type" and click on the 
"Settings" button. The "TCP/IP Settings" dialog box 
appears.

Enter the IP address of the printer. The TCP/IP Port 
Number has to be 5001. Select "OK" and then "Create". 
The PSF/2 printer device is now created and is ready to 
print from a PSF/2 connected IBM host.

In the PSF/2 - Control Panel select the "Options > Setup 
Queues". The "Setup Queues" dialog box appears.