Insignia HRSD16 사용자 설명서

Operation

Document 800-00918

 

Rev E

105

12/07

To display a Picture-in-Picture, press DISPLAY in the single-screen mode. You can 
change the location of the PIP counterclockwise and clockwise by pressing the UP and 
DOWN arrows. You can change the PIP size by pressing the LEFT and RIGHT arrows.

There are two ways you can enter the Active Cameo mode: 

•

Press and hold CAMEO for two seconds or longer in any multi-view format.
OR

•

Select Edit Group in the Mouse display menu. 
A yellow outline appears around the video indicating the Active Cameo mode. To 
move the active cameo frame, press the arrow buttons. 

There are two ways to exit the Active Cameo mode:

•

Press  

(Play/Pause).

OR

•

Press CAMEO again, and then select Exit Edit Group in the cameo menu. 
The active cameo mode remains in effect for 15 seconds if there is no further 
operation.

1.

Enter the Active Cameo mode.

2.

Press the button for the camera you want to display in the active cameo. After 
setting the camera number to active cameo, the DVR moves the active cameo to 
the next cameo. 

The camera number exists on 
the current screen

The active cameo is changed with 
the existing camera number

The camera number does not 
exist on the current screen

The active cameo is replaced by the 
camera number