Insignia NS-1DRVCR 사용자 설명서

www.insignia-products.com

Do not touch the playback side of the disc. Hold 
the disc by the edges so that fingerprints do not 
get on the surface. Never stick paper or tape on 
the disc.

After playing, store the disc in its case. Do not 
expose the disc to direct sunlight or sources of 
heat and never leave it in a parked car exposed 
to direct sunlight.

Fingerprints and dust on the disc can cause 
poor picture quality and sound distortion. Before 
playing, clean the disc with a clean cloth. Wipe 
the disc from the center out.

Do not use strong solvents such as alcohol, 
benzine, thinner, commercially available 
cleaners, or anti-static spray intended for older 
vinyl records.

Reset your recorder if you observe any of the 
following symptoms:
•

When the recorder is plugged in, but the 
power will not turn on or off.

•

When the display window does not working.

•

When the recorder does not operate 
normally.

To reset the recorder:
•

Press and hold the POWER button for more 
than five seconds. This forces the recorder to 
turn off. Press the POWER button again to 
turn the recorder back on.
- OR -

Unplug the power cord and then plug the 
power cord again after more than five 
seconds.

Power requirements 

AC 120V, 60 Hz

Power consumption 

24W

Dimensions (approx.) 

16.9 × 3.1 × 10.2 in. 

(w × h × d)

(430 × 78.5 ×
266 mm)

Mass (approx.) 

10.14 lbs (4.6 kg)

Operating temperature 

41°F to 95°F 
(5°C to 35°C)

Operating humidity 

5% to 90%

Signal system 

NTSC

Cannot play 
disc a 
recorded on 
your 
recorder on 
another 
DVD player.

The disc was 
recorded in Video 
mode

Finalize the disc. See “Disc 
Settings” on page 15.

Some players will 
not play even a 
finalized disc 
recorded in Video 
mode

No solution

The disc was 
recorded in VR 
mode

The other player must be RW 
compatible in order to play the 
disc

Discs recorded with 
copy-once material 
cannot be played on 
other players

No solution

Cannot 
record or 
did not 
record 
successfully

The remaining blank 
space on the disc is 
insufficient

Use another disc

The source you are 
trying to record is 
copy-protected

You cannot record the source

When recording to a 
Video mode disc, 
programs that are 
copy-once 
protected cannot be 
recorded

Use a VR mode formatted disc 
for copy-once material

Stereo 
Audio 
Record or 
Playback is 
not present

Recorder A/V Out 
jacks are not 
connected to TV 
A/V In jacks

Make A/V connections. Stereo 
is available only on A/V output 
from recorder.

Recorder 
Audio/Video Out is 
not selected for 
viewing at the TV

Select AUX or A/V source as 
TV input

Never operate this product immediately after 

moving it from a cold location to a warm 

location. Leave it for two or three hours 

without operating it. If you use this product in 

such a situation, it may damage tapes, discs, 

or internal parts.