Ingenico 6500 사용자 설명서

 

 

Ingenico 6500 User’s Guide 

47 

 

6.4.11 

DHCP is dynamic host configuration protocol. If the terminal is working in Ethernet mode, and 
if DHCP is ON, the terminal can ask the remote server to assign an IP address for it.  

Display 

Action 

 

To access the extended menu, restart the terminal 

by pressing [1] + [CAN] + [OK]; while the terminal 

is starting up, access the extended menu by 

pressing the [1] and [3] keys simultaneously. 

Serialnum Inject 
System Config 
System Info 

Supervisor Menu 

Press [ ], [ ], [ ], [Enter] to select Supervisor 

Menu. 

Enter Password: 

Key password [2] [6] [3] [4], then press [Enter]. 

Change Password 
Application File 
Security 

Sys Parameters 

Press [ ], [ ], [ ], [Enter] to select Sys 

Parameters. 

Download Method 
Download Port 

Setup Port 

Press [ ], [ ], [Enter] to select Setup Port. 

Port1 
Port2 

Port3 

Press [ ], [ ], [Enter] to select Port3, the E-NET 

port - Ethernet. 

Interface Type 
Baud Rate 
Data Bits 
Stop Bits 
Parity 
Retry Count 
Response TMO 

DHCP 

Press [ ] seven times, then press [Enter] to select 

DHCP. 

None  
Auto 

Select None or Auto, and then press [Enter].