Hughes HN7700S 사용자 설명서

 

3. Verify that 

ENABLED

 appears in the 

vadb_net_enabled

 and 

vadb_rem_enabled

 fields. If 

ENABLED

 does not appear in 

both fields, contact Installer Support and request that these 
options be enabled.

4. Verify that the VADB access phone numbers appear in the 

prim phone_num

 and 

bkup phone_num

 fields. 

5. Make a note of the VADB gateway address. You will need 

this address to test VADB functionality.

A user name and password are automatically generated and 
downloaded with the VADB profile. The VADB feature uses this 
user name and password to automatically connect to the Internet 
if necessary.

Follow these steps to test the telephone line to which the HN 
router will be connected:

1. Connect a telephone handset to the telephone jack or splitter.
2. Dial the VADB access phone number listed in the 

prim 

phone_num

 field.

3. Listen for modem tones, which indicate the connection is 

being established between the access number and the 
handset.
If you do not hear modem tones, you may need to modify the 
VADB access phone number to account for site-specific 
dialing rules. For example, if dialing an 8 or 9 is required to 
access an outside line at the site, you must add the required 
number to the VADB access phone number. Ask a site 
contact for site-specific dialing rules and then refer to the 
installation specification for instructions on how to modify 
the VADB access phone number.