Hotbrick VPN 800 / 2 사용자 설명서

HotBrick Network Solutions 

Check the data supplied by your ISP, and select the appropriate option. 

•  Static IP – Select this if your ISP has provided a Fixed or Static IP 

address. Then enter the data into the Address Info fields.  

•  Dynamic IP – Select this if your ISP provides an IP address automatically, 

when you connect. You can ignore the Address Info fields. 

•  PPPoE – Select this if your ISP uses this method. (Usually, your ISP will 

provide some PPPoE software. This software is no longer required, and 
should not be used.) 
If this method is selected, you must complete the PPPoE dialup fields. 

If using the PPTP connection method, select Static IP or Dynamic IP, as 
appropriate, according to the IP address method used by your ISP. 

This is for Static IP users only. Enter the address information provided by your 
ISP. If your ISP provided multiple IP address, you can use the Multi-DMZ 
screen to assign the additional IP addresses. 

This is for PPPoE and PPTP users only. 

•  Enter the Username and Password provided by your ISP. 
•  If using PPTP, enable the PPTP Connection checkbox, and enter the IP 

address of the PPTP server. 

•  Host name (Optional For PPPoE),This field is used by a Host to uniquely 

associate an access concentrator to a particular Host request. 

There are additional PPPoE/PPTP options on the Port Options screen. 

To use multiple PPPoE sessions on either port, configure the Advanced 
PPPoE screen. 

If using a Fixed IP address, you MUST enter at least 1 DNS address.  
If using Dynamic IP or PPPoE, DNS information is optional. 

•  Host name – This is required by some ISPs. If your ISP provided a Host 

Name, enter it here. Otherwise, you can use the default value. 

•  Domain name – This is required by some ISPs. If your ISP provided a 

Domain Name, enter it here. Otherwise, you can use the default value. 

•  MAC address – Some ISP's record your MAC address (also called 

"Physical address" or "Network Adapter address"). If so, you can enter the 
MAC address expected by your ISP in this field. Otherwise, this should be 
left at the default value. 

 

 

Setup of the HotBrick VPN 800/2 Firewall Router is now complete. PCs on your LAN must now be 
configured. See the following section for details. 

Page 14