HP XC System Software 3.2.1 사용자 설명서
If you do not specify the --ic=AdminNet option, the discover command attempts to locate
the highest speed interconnect on the system with the default being a Gigabit Ethernet network
that is separate from the administration network.
the highest speed interconnect on the system with the default being a Gigabit Ethernet network
that is separate from the administration network.
3.4.4 Myrinet Interconnect Connections
The supported Myrinet interconnects do not have the ordering requirements of the Quadrics
interconnect, but it makes sense to structure it in parallel with the other two networks in order
to make the connections easy to maintain and service.
interconnect, but it makes sense to structure it in parallel with the other two networks in order
to make the connections easy to maintain and service.
3.4.5 InfiniBand Interconnect Connections
The supported InfiniBand interconnects do not have the ordering requirements of the Quadrics
interconnect, but it makes sense to structure it in parallel with the other two networks in order
to make the connections easy to maintain and service.
interconnect, but it makes sense to structure it in parallel with the other two networks in order
to make the connections easy to maintain and service.
If you use a dual-ported InfiniBand host channel adapter (HCA), you must connect the IB cable
to the lowest-numbered port on the HCAs; it is labeled either Port 1 or P1. This is necessary
so that the OpenFabrics Enterprise Distribution (OFED) driver activates the IP interface called
ib0
to the lowest-numbered port on the HCAs; it is labeled either Port 1 or P1. This is necessary
so that the OpenFabrics Enterprise Distribution (OFED) driver activates the IP interface called
ib0
instead of ib1.
58
Making Node and Switch Connections