HP GRACO OR PRO TI1681A 사용자 설명서
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2002, Graco Inc. is registered to I.S. EN ISO 9001
TI1681A
WB 100
Isolation Enclosure
Isolation Enclosure
PRO Xs3
Smart Gun and
Fluid Hose
Smart Gun and
Fluid Hose
TI2139a
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure
100 psi (0.7 MPa, 7 bar) Maximum Working Fluid Pressure
For use when electrostatically spraying conductive,
waterborne fluids that meet at least one of the
following conditions for non-flammability:
waterborne fluids that meet at least one of the
following conditions for non-flammability:
FM Approved
•
The fluid has a flash point above 140
°
F (60
°
C)
and a maximum organic solvent concentration of
20%, by weight, per ASTM Standard D93. FM
20%, by weight, per ASTM Standard D93. FM
•
The fluid does not sustain burning when tested per
ASTM Standard D4206 Sustained Burn Test.
ASTM Standard D4206 Sustained Burn Test.
CE-EN 50059 Compliant
•
Materials which cannot be ignited, in any mixture
with air, by an energy source of less than 500 mJ.
with air, by an energy source of less than 500 mJ.
See page 3 for a List of Models
U.S. Patent No. 7,226,004
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Save these instructions.
309293J
Instructions/Parts List
ELECTROSTATIC, WATERBORNE, AIR SPRAY
WB100 Isolation System and
PRO
™
Xs3 Spray Gun