Horstmann C-Stat ZW 사용자 가이드
DISPLAY
Actual Room Temperature
This is the actual room temperature
measured by the C-Stat
measured by the C-Stat
Set Temperature
This is the temperature that the C-Stat
will allow the room to reach. The
temperature range can be set between
5°C and 30°C
will allow the room to reach. The
temperature range can be set between
5°C and 30°C
When the temperature shown in the
display is achieved the C-Stat will switch
the heating OFF.
display is achieved the C-Stat will switch
the heating OFF.
If the temperature in the room falls below
the setting the C-Stat will switch the
heating ON.
the setting the C-Stat will switch the
heating ON.
Until (time)
This is the time that the next
temperature setting is due to operate
temperature setting is due to operate
Then (temp)
This is the temperature setting that is
due to operate next
due to operate next
Day of the week
It is important that the correct day of the
week shows in the display
week shows in the display
Time of day
This is the current time of day
Setting Buttons
Press any button to illuminate the
display.
display.
The message 'To override press -/+ To
see menu press ENTER' will appear
see menu press ENTER' will appear
No Radio Waves
Wireless connection not set up
Solid Radio Antenna
Z-Wave communication present
– Flashing Radio Antenna – Temporary
loss of Z-Wave communication
– Flashing Radio Antenna – Temporary
loss of Z-Wave communication
ACTIVATING THE BACK-LIT DISPLAY
Press any button to illuminate the display. This will remain illuminated for
10 seconds
10 seconds
GENERAL INFORMATION
During programming please note that the display will return to its normal
operating screen if the last button press exceeds 10 seconds.
operating screen if the last button press exceeds 10 seconds.
5