Horstmann C-Stat ZW 사용자 가이드

To access the MAIN MENU take the following steps:

Press ENTER  twice

Press '-' or '+'  to 
toggle between the 
menu options

This allows the user to adjust the different 

time and temperature settings from the 
factory default settings shown in the table 
on page 8.

Up to six different temperature levels can be 

set in any 24 hour period

This puts the C-Stat into Frost protection or 

Standby condition and allows the heating to 
be permanently switched off but will activate 
and switch the heating on if the temperature 
in the house falls below the standby 
temperature set.

All programme settings are overridden and 

the unit will not return to normal operation 
until the standby period has ended by 
pressing the ENTER button. 

This puts the C-Stat into a temporary 

standby mode with a start and end date 
which can be set to coincide with a holiday 
period. At the end of the set period the C-
Stat will resume normal operation

The C-Stat has a built in clock and calendar. 

This will require setting on initial installation. 
If this has not been set on installation 
please go to Setting the TIME and DATE 
section on page 14 before continuing

Enables the programming of various options 

outlined in the SET UP MENU on page 15 
of these instructions – These should be set 
on installation.

9