Hitachi 1000 사용자 설명서

22

BladeSymphony 1000 Architecture

 

• Intel VT Flex Migration — Intel hardware-assisted virtualization provides the ability to perform live 

virtual machine migration to enable fail-over, load balancing, disaster recovery, and real-time server 
maintenance.

• New features include Error Correcting Code (ECC) system bus, new memory mirroring, and I/O hot-

plug

The Quad-Core Intel Xeon 5400 Series is designed for mainstream, new business, and HPC servers, 
delivering increased performance, energy efficiency, and the ability to run applications with a smaller 
footprint. Built with 45 nm enhanced Intel Core microarchitecture, the Quad-Core Intel Xeon 5400 
Series delivers 8-thread, 32- and 64-bit processing capabilities with 12 MB of L2 cache per processor, 
providing more computing for threaded applications in a variety of deployments.

Intel's 45 nm uses 820 million transistors in the Intel Xeon processor 5400 series (Intel Xeon processor 
5300 series has 582 million transistors). More transistors deliver more capability, performance, and 
energy efficiency through expanded power management capabilities. Other enhancements are 
designed to reduce virtualization overhead. And 47 new Intel Streaming SIMD Extensions 4 (SSE4) 
instructions can help improve the performance of media and high-performance computing applications.

Other features include:

• Fully Buffered DIMM (FBDIMM) technology that increases memory speed to 800 MHz and 

significantly improves data throughput

• Memory mirroring and sparing designed to predict a failing DIMM and copy the data to a spare 

memory DIMM, increasing server availability and uptime

• Support for up to 128 GB memory

• Enhanced Intel SpeedStep technology allows the system to dynamically adjust processor voltage 

and core frequency, which results in decreased power consumption and heat production

The Intel Xeon Server Blade is equipped with eight FBDIMM slots supporting Registered DDR1 
SDRAM. Supported capacity includes 512 MB, 1 GB, and 2 GB, DDR1-266 DIMMs. The memory 
system is designed to control a set of two DIMMs for the memory device replacing function. 
Accordingly, if DIMMs are added, they must be installed in two-DIMM units. The DIMMs in the same 
bank must be of the same type. The DIMMs in different banks can be of different types.

Intel supports Fully Buffered DIMM (FBDIMM) technology in the Intel Xeon 5200 dual-core and 5400 
quad-core processor series. FBDIMM memory provides increased bandwidth and capacity for the Intel 
Xeon Server Blade. It increases system bandwidth up to 21 GB/sec. (with DDR2-667 FBD memory). 
FBDIMM technology offers better RAS by extending the currently available ECC to include protection 
for commands and address data. Additionally, FBDIMM technology automatically retries when an error 
is detected, allowing for uninterrupted operation in case of transient errors.