Hitachi SCANJET N9120 사용자 설명서
Scanning at a higher resolution than necessary creates a larger file with no additional
benefit.
benefit.
•
Color scans create larger files than do black and white scans.
•
If you are scanning a large number of pages at one time, consider scanning fewer
pages at a time to create more, smaller files.
pages at a time to create more, smaller files.
•
Use the Kofax VirtualReScan software to process the scanned data. Kofax
VirtualReScan compresses the data, which can result in a smaller file.
VirtualReScan compresses the data, which can result in a smaller file.
The imprinter is not printing or the print quality is poor
If you reset the ink level in the HP Scanner Tools Utility the last time that you replaced
the print cartridge, you will receive imprinter status alerts when the ink level is running
low. If you did not reset the ink level at the time that you replaced the print cartridge, you
might receive erroneous imprinter status alerts or the imprinter might run out of ink before
the HP Scanner Tools Utility reports that the ink level is low.
the print cartridge, you will receive imprinter status alerts when the ink level is running
low. If you did not reset the ink level at the time that you replaced the print cartridge, you
might receive erroneous imprinter status alerts or the imprinter might run out of ink before
the HP Scanner Tools Utility reports that the ink level is low.
NOTE: To use the imprinter, load originals in the automatic document feeder (ADF).
The imprinter cannot print on pages placed on the scanner glass.
The imprinter cannot print on pages placed on the scanner glass.
To remedy other imprinter problems, try the following:
1. Verify that the Enable Imprinting check box is selected in the scanning software.
2. If the imprinter ink is smearing or leaving blobs of ink on the paper, remove the print
1. Verify that the Enable Imprinting check box is selected in the scanning software.
2. If the imprinter ink is smearing or leaving blobs of ink on the paper, remove the print
cartridge, and then gently wipe the copper contacts of the print cartridge with a clean,
damp, lint-free cloth. Reinstall the print cartridge, but do not reset the ink level in the
HP Scanner Tools Utility.
damp, lint-free cloth. Reinstall the print cartridge, but do not reset the ink level in the
HP Scanner Tools Utility.
3. Verify that the cartridge stall latch holds the print cartridge firmly in place.
4. Verify that the imprinter is positioned at one of the predefined locations that is inside
4. Verify that the imprinter is positioned at one of the predefined locations that is inside
the width of the paper as it is fed through the ADF.
5. Clean and test the imprinter:
a. Press the Tools ( ) button on the scanner front panel to open the HP Scanner
Tools Utility. Click the Imprinter tab, and then click Clean Imprinter.
b. Ensure that the ADF has at least one piece of paper in the input tray.
c. In the HP Scanner Tools Utility, click Test Imprinter.
d. If the imprinter print quality is good, continue scanning. Otherwise, replace the
c. In the HP Scanner Tools Utility, click Test Imprinter.
d. If the imprinter print quality is good, continue scanning. Otherwise, replace the
print cartridge.
See also
Scanner buttons are not working correctly
•
•
•
Chapter 4
36
Troubleshooting