Handspring Visor Handheld Desktop 사용자 설명서
Page 176
Advanced HotSync® Operations
Desktop computers are likely to require an infrared device attached to
a physical COM port. Laptops are likely to have a built-in IR port.
Your computer must also have an installed infrared driver.
a physical COM port. Laptops are likely to have a built-in IR port.
Your computer must also have an installed infrared driver.
Does your computer supports infrared communication?
Check the documentation that came with your computer to see if it
supports infrared communication.
supports infrared communication.
Configuring HotSync Manager for
infrared communication
infrared communication
Next you need to go to the HotSync Manager and specify the port
used for infrared communication.
used for infrared communication.
To configure HotSync Manager for infrared communication:
1. Open Palm Desktop software.
1. Open Palm Desktop software.
2. From the HotSync menu, choose Setup.
3. In the HotSync Controls tab, select Enabled.
4. Click the Serial Port Settings tab.
5. Under Check for handheld connection using, select Local Setup.
6. Under Local Setup, select Infrared Port from the Port pop-up
menu.
7. Close the HotSync Software Setup dialog box.
The HotSync Manager is now communicating with the port defined
for infrared communication.
for infrared communication.
Note:
You cannot use your cradle again until you reconfigure the
HotSync Manager to communicate with the port defined for
cradle synchronization.
cradle synchronization.
Select
Infrared
Port
Infrared
Port