Goodmans GFMTDAB10 사용자 설명서

Select a suitable location for the antenna. This can either be at one side of the front 
windscreen, as shown, or a suitable non-opening rear window. Note that the antenna 
cable is 2.0m in length. For best results, position the aerial wires 2-3 cms from the edge 
of the glass.
Peel the backing off the antenna and attach the antenna to the inside of the window, 
ensuring it is clean and dry before you do so. It is only designed to be used once, and if 
removed, will not re-adhere to the glass.

Run the antenna lead along the trim so it is not showing if possible, and attach to the 
unit by screwing the antenna connector onto the antenna jack on the side of the unit. 
Screw it up tightly using fingers only. 

Clean the area you have chosen with a dry cloth then peel off the transparent film from 
the suction cap. Press the suction cap firmly onto the windscreen and push down the 
catch to securely fasten the mount to the windscreen.

 

 

A spanner is not necessary.