Global Technology Associates SOFTWARE FIREWALL GBWA200501-01 사용자 설명서

 

2 – Installation 15

USB  pen  drives  may  appear,  but  should  not  be  selected  for 
installation as they are not IDE-bootable devices. CD-ROM or DVD-
ROM drives will not be displayed by the GB-Ware system installation 
process,  as  they  are  not  writable  discs.  Other  drives  will  not 
display.

da0

USB storage device 
(Generic storage  
device)

[978/4/32]

ad0 

IDE storage device 
(with device manufac-
turer identification)

[978/4/32]

*If there is an indication of the device size in the description, this 
can  be  used  to  help  identify  the  correct  drive.  Device  Geometry 
format is in cylinders/heads/sectors.

Once you have selected the desired device, press tab to 

, then press the 

 or 

 to continue.

Carefully select the correct storage device, especially when using 
a USB Compact Flash reader/writer to install GB-Ware on a separate 
system. Installing GB-Ware on the wrong device will overwrite the 
disk (e.g. selecting the system hard drive will overwrite your operating 
system or other data, destroying it). You may wish to disconnect 
non-GB-Ware  hard  drives  before  installing  to  prevent  accidental 
erasure.

Installing the Runtime
The next dialog will display the warning: Installing will destroy any 
existing data on <device number>!!! Are you sure you want to install GB-
Ware? where “device number” is the Compact Flash card or hard drive you 
will be writing to, and “runtime version” is the GNAT Box runtime version 
you have selected. 

Tab to 

, then press 

 or 

 when you are sure you have 

selected the correct drive and are ready to install the runtime.