Gateway DVD Player 사용자 설명서

www.gateway.com

■

Make sure that all components in your audio system are securely 
plugged in.

■

Make sure that you keep your audio system’s cables away from a 
transformer or motor, and that you keep them at least 10 feet away from 
a TV or fluorescent lights.

■

Move your TV away from your audio components.

■

The plugs and jacks may be dirty. Unplug them, then wipe them clean with 
a cloth slightly moistened with isopropyl alcohol.

■

Clean the DVD.

■

Point the remote control directly at the sensor on the front of the player.

■

Remove any obstacles between the remote control and the player.

■

Move closer to the player when using the remote control.

■

Replace the batteries.

■

Make sure that there is a DVD in the tray.

■

If the DVD has two playable sides, make sure that the side you want to 
play is facing down in the tray.

■

The DVD may be warped and unplayable.

■

The region code on the DVD may not be Region 1.

■

Moisture may have condensed inside the player. Remove the DVD and 
leave the player turned on for about half an hour to dry the condensation.

■

Resume Play is active. Press 

 twice, then restart DVD playback.

■

Your player may be outputting a 5.1-channel sound signal, while you have 
only stereo speakers connected. Check your audio settings and speaker 
connections.