Ericsson Multi-Format Receiver RX1290 사용자 설명서

다운로드
페이지 176
 
Introduction
 
1.3.2 
Input Connections  
The Satellite Receiver interfaces directly to Low-Noise Block (LNB) and accepts an 
intermediate frequency (IF) input in the band 950 - 2150 MHz (L-band) for operation 
in the specified symbol-rate range (see Annex B, Technical Specification). The unit 
can provide dc power and polarization switching to the LNB. 
1.3.3 
What the Satellite Receiver Does 
The Receiver can be tuned to a specified satellite channel frequency and 
polarization. The input is down-converted via a Low-Noise Block (LNB) to provide an 
L-band input to the Receiver. The front-end tuning is microprocessor controlled with 
a frequency synthesized local oscillator. A software tuning and acquisition algorithm 
resolves translation errors (mainly due to the LNB).  
The signal is then passed to a demodulator that recovers the signal using soft-
decision decoding. The resulting stream is Reed-Solomon decoded and 
descrambled to provide inputs to the Decoder circuit. The received channel may 
contain multiple Services, therefore the Receiver’s demultiplexer is configured to 
select a single video Service and other audio/data components and present them at 
the output. 
 
Figure 1.3  What the Satellite Receiver Does 
EN/LZT 790 0003/2 R1A
 
 
 
 
1-9