Epson V7 사용자 설명서
2-28
1. Operation of V7 Main Menu
Date and Time Setting
1. Move the cursor using the [
←] / [→] switch, and change the value by pressing the [+] /
[
−] switch.
2. When the desired date and time are set, press the [Set] switch to determine the setting.
3. The calendar data is updated as set.
3. The calendar data is updated as set.
Initializing SRAM
When the SRAM memory or cassette is initialized, the data contained is cleared.
Double-check before initializing the SRAM memory or cassette.
Double-check before initializing the SRAM memory or cassette.
1. “Extension” is shown when V7EM-S (SRAM cassette) is mounted; “Built-in” is shown
when it is not mounted.
2. Press the [Format] switch and the [Execute] switch. The SRAM area is initialized in the
current screen data format. When initialization has been completed, the message
“
“
∗∗Format Completed∗∗” is displayed.
6.
Extension Program Information
When the [Extension] switch on the Main Menu screen is pressed, the following “Extension
Program Info.” screen appears. The driver setting and parameter setting for temperature
controller/PLC2Way communication, ladder transfer function, Modbus slave
communication, etc. are displayed.
Program Info.” screen appears. The driver setting and parameter setting for temperature
controller/PLC2Way communication, ladder transfer function, Modbus slave
communication, etc. are displayed.
Main Menu
Extension Program Info.
Temp. Control / PLC2Way
Temp. Control / PLC2Way
Comm. Parameter
Comm. Parameter
Comm. Parameter
Temp./PLC2Way Control Drv
VER. 1.100 RKC SR-Mini/CB
Editor:MJ1
Signal Level : RS485
Baud Rate : 9600
Data Length : 8
Stop Bit : 1
Parity : None
Retry Time :
3
Time-out :
100 msec
Send Delay :
0 msec
Return Time :
10 sec